Rolls Royce Slio 02 Canman Controller Network
Rolls Royce Slio 02 Canman Controller Network Original price was: 450.00 $.Current price is: 385.00 $.
Back to products
ALLEN BRADLEY ControlLogix Logix5555 Processor
ALLEN BRADLEY ControlLogix Logix5555 Processor Original price was: 419.00 $.Current price is: 210.00 $.
-50%
Click to enlarge

Autonics 2000 DPU Series Digital Thyristor Power Controllers

Original price was: 1,000.00 $.Current price is: 500.00 $.

Details:

  • Accurate feedback control (static current, static voltage, static power) by RMS measurement
  • Phase control and zero-crossing cycle control (fixed/variable cycle) methods for various load control
  • Remote monitoring and remote control
  • Supports Modbus RTU protocol by RS485 communication
  • Fast response speed by high-speed CPU
  • Built-in customizable 6 digital inputs (DI)
  • Basic variable alarm outputs; current error, heater disconnection (heater some disconnection-detection), etc.
  • Supports multi-input of a control input signal (current, voltage, potentiometer, etc)
  • Enables the install control part separately
  • Applicable load: all loads such as super kanthal, platinum, molybdenum, carbon, halogen lamp, chrome, nickel, etc.
Add to wishlist

Description

Brand Autonics
Model Number DPU Series Digital Thyristor
Control Phase Single Phase / 3-Phase
Rated frequency 50/60Hz (auto recognition), allowable frequency range: ± 2 Hz
Min. load Current 1 A
Output range Phase control: 0 to 98%, Z.C. control : 0 to 100%
Control Method
  • Phase control: normal/constant current feedback / constant voltage feedback / constant power feedback
  • Cycle control ( Z.C.): fixed cycle / variable cycle
  • ON/OFF Control (Z.C.)
digital input AUTO / MAN Selectable, RUN / STOP selectable, Reset, Output holding, SP set (SP 1 to 6)
Display Type Control Input, load voltage, load current, load power, load resistance, Power supply frequency
Min. display output Over 2.5% of rated voltage/current
RS485 comm. Modbus RTU method
Approval C ∈ EAC
Power supply 110 / 220 / 380 / 440 VAC ∼model ( fan and control power 220 VACs∼50/60Hz separately)
Allowable voltage range Single-Phase: 90 to 110% of power supply 3-phase: 85 to 115% of power supply
Power consumption Single-phase: ≤ 7 W ( except fan power ) 3-phase: ≤10 W ( except fan power )
Display method
  • Display value and setting value display: 7 segment 4-digit
  • State display: Single-phase LED × 4 , 3-phase LED × 6
  • Display value percentage display: 11 LED bar
Dielectric strength Between input terminal and power terminal:2000 VAC∼50/60Hz for 1 min
Vibration 0.75 mm double amplitude at a frequency of 5 to 55 Hz (for 1 min) in each X, Y, and Z direction for 2 hours
Insulation resistance ≥ 200 MΩ (500 VDC= megger)
Noise immunity ± 2 kV square waves noise (pulse width: 1μs) by the noise simulator
Ambient temp. -10 to 50°C, storage: -20 to 80°C (no freezing or condensation)
Ambient humidity 5 to 90%RH, storage: 5 to 90%RH (no freezing or condensation)

Reviews

0 reviews
0
0
0
0
0

Reviews

Clear filters

There are no reviews yet.

Be the first to review “Autonics 2000 DPU Series Digital Thyristor Power Controllers”

Your email address will not be published. Required fields are marked *